Mount the Receiver
Attach the Tek-Mount Receiver to a compatible belt attachment, MOLLE platform, drop-leg platform, bag, vehicle, wall, desk, safe, or other mounting location.
Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Additional Tek-Mount Receiver
The Tek-Mount™ Receiver is the female portion of the Tek-Mount™ system, which is a two part quick connect mounting system and requires the Tek-Mount™ 360 Insert Disk for proper use. This system provides the same function, speed, and ease of use as the Safariland® QLS but with the added ability to cant your holster instantly without the use of screws or posts. The patent pending Tek-Mount allows for 10 degree cant increments in 360 degrees. The receiver can be mounted on your existing belt attachments, MOLLE Attachments or directly to surfaces like car dashboards, bed frames, and more when choosing the "No Attachment" option.
Features
36 Cant Positions / 360 Degrees
36 interlocking teeth give the user 36 different cant positions that adjust in 10 degree increments a full 360 degrees.
Ambidextrous Secondary Locking Lever
Ensure your gear stays in place and the release tab isn't accidentally depressed with the ambidextrous secondary locking lever.
Duty Strong and USA Made
Made in the USA of a high-strength glass filled polymer, the Tek-Mount can withstand over 1000 lbs of vertical pull force under optimal conditions.
What's Included
Tek-Mount Receiver with No Attachment
1x Tek-Mount Receiver
3x 3/16" Posts
3x 5/16" Truss Head Screws
1x 3/8" Post
1x 3/4" Oval Head Screw
1x Plastic Washer
Tek-Mount Receiver on Tek-Lok
1x Tek-Mount Receiver on Tek-Lok Belt Attachment
Tek-Mount Receiver on Molle-Loks
1x Tek-Mount Receiver on 3" Molle-Lok Pair
Tek-Mount Receiver on Duty Drop
1x Tek-Mount Receiver on Duty Drop Belt Attachment
1x Thigh Strap
Tek-Mount Receiver on Drop Leg Platform
1x Tek-Mount Receiver on Drop Leg Platform
**Tek-Mount is NOT compatible with our Total Eclipse 2.0™ & Total Eclipse OWB Holsters.
Quick Connect Mounting System
One Mount. Endless Configurations.
The Tek-Mount™ is a two-part quick-connect mounting system consisting of a Receiver and a 360 Insert Disk™. It allows compatible holsters, mag pouches, knife sheaths, and carried gear to be securely mounted, quickly removed, and repositioned without rebuilding your setup.
Rotate mounted gear through 36 individual cant positions across a full 360 degrees. Move the same piece of equipment between compatible belt attachments, MOLLE platforms, drop-leg systems, bags, vehicles, walls, and other mounting locations.
360°
Full Rotation
36
Cant Positions
1,100+
LB Vertical Pull Force
USA
Made in the USA
Simple. Secure. Modular.
How Tek-Mount Works
Build a mounting system around your gear instead of permanently committing each item to one attachment or location.
Attach the Insert Disk
Secure the 360 Insert Disk to a compatible OWB holster, mag pouch, knife sheath, medical pouch, or other carried equipment.
Lock and Adjust
Slide the Disk into the Receiver until it automatically locks. Rotate the mounted gear into any of 36 positions without removing screws or mounting hardware. Flip the ambidextrous secondary locking latch to prevent accidental detachment.
NTOA Member Tested and Recommended
Tek-Mount has been independently evaluated by members of the National Tactical Officers Association for durability, reliability, and practical performance.
Designed for modular use and everyday dependability, Tek-Mount helps keep compatible gear accessible, adjustable, and secure across a wide range of real-world mounting environments.
Built for Modular Gear
Tek-Mount Features
Securely mount, reposition, and transfer compatible gear without rebuilding your entire setup.
Auto-Locking Receiver
The 360 Insert Disk automatically locks into the Receiver when fully inserted, securely joining both halves of the system.
36 Cant Positions
Adjust mounted gear in 10-degree increments through a complete 360-degree range of rotation.
Tool-Free Adjustment
Change the cant of your mounted equipment without repeatedly removing screws, posts, or mounting hardware.
Secondary Lock
An ambidextrous secondary locking mechanism provides an additional level of security to ensure your gear stays in place no matter what.
Cross-Platform Modularity
Move one piece of gear between multiple Receivers installed on different attachments, equipment, or surfaces.
Glass-Filled Polymer
Made in the USA from high-strength glass-filled polymer engineered for demanding everyday, range, and duty use.
Duty Strong
Tested Beyond Everyday Use
Tek-Mount is designed to remain secure through demanding movement, impact, and load. Under controlled test conditions, the system withstands more than 1,100 pounds of vertical pull force and more than 800 pounds of horizontal pull force.
1,100+
LB Vertical Pull Force
800+
LB Horizontal Pull Force
One System. Multiple Locations.
Mount It Where You Need It
Install Tek-Mount Receivers across your equipment and move compatible gear between them as your loadout or environment changes.
Belts
Tek-Mount works with many compatible belt attachments for 1.5-inch, 1.75-inch, 2-inch, and 3-inch EDC belts, duty belts, battle belts, and more.
Vests & Carriers
Attach Tek-Mount directly to compatible MOLLE vests, plate carriers, chest rigs, and tactical equipment to quickly configure your kit.
Bags, Packs & Pouches
Add modular mounting locations to compatible MOLLE bags, packs, medical kits, and equipment pouches.
Vehicles
Utilizing our Multi-Surface Mounting Screws, Tek-Mount allows you to position compatible gear where it is needed most while on the move.
Desks & More
Add a Receiver beneath a desk or inside a compatible safe, locker, cabinet, or workstation for another convenient docking location.
Cross-Brand Compatibility
Built to Work With Your Gear
Tek-Mount is compatible with many OWB holsters, pouches, sheaths, and mounting products from leading gear manufacturers.
Compatible Brands Include
- Alien Gear Rapid Force
- ANR Design
- Blackhawk
- Blade-Tech
- Eleven 10
- G-Code
- Guardian Warrior Solutions
- Hammer Armament
- High Speed Gear
- PHLster
- Rounded
- Safariland
- T.REX ARMS
- Tier 1 Concealed
- True North Concepts
- TXC Holsters
- U.S. Duty Gear
- Werkz
- Zero9 Holsters
- And More
Safariland® Mounting Pattern
Holsters using the Safariland® three-hole mounting pattern require the Tek-Mount Safariland® Adapter Kit , sold separately.
Compatibility Note
Tek-Mount is not compatible with Blade-Tech Total Eclipse 2.0™ or original Total Eclipse OWB holsters.
Concerned about counterfeit products? Learn how to identify a genuine Blade-Tech Tek-Mount.
Tek-Mount System Details
A Closer Look at the Quick-Connect System
See how Tek-Mount locks compatible gear into place, provides tool-free cant adjustment, and expands to additional equipment through dedicated mounting adapters and accessories.
Quick-Connect Interface
Auto-Locking Quick Mount
Insert a compatible holster or carried item equipped with a 360 Insert Disk into the Tek-Mount Receiver. When fully inserted, both parts securely interlock.
The quick-connect interface allows equipment to be removed and reinstalled without disassembling the belt attachment or mounting platform.
Tool-Free Positioning
36 Cant Positions Across 360 Degrees
The Tek-Mount Receiver and 360 Insert Disk use 36 interlocking positions, allowing mounted gear to be adjusted in 10-degree increments through a full 360 degrees.
Change the angle of a compatible holster, pouch, sheath, or accessory without removing its mounting screws or posts.
Nylon and Fabric Equipment
Direct to MOLLE Mount
The Direct to MOLLE Mount allows a Tek-Mount 360 Insert Disk to attach to compatible nylon and fabric pouches, carriers, vests, belts, packs, and bags.
It adds Tek-Mount compatibility to equipment that does not use a traditional rigid holster mounting pattern.
Shop Direct to MOLLE
Holster Pattern Adapter
Safariland® Compatible
The Tek-Mount Safariland® Adapter Kit connects the 360 Insert Disk to compatible holsters using the Safariland three-hole mounting pattern.
The adapter is sold separately and creates the interface between the holster and the Tek-Mount quick-connect system.
Shop Safariland Adapter Kit
Understanding the Components
What Each Part of the Tek-Mount System Does
Start with the Receiver and 360 Insert Disk, then expand the system with additional mounting points, disks, adapters, and accessories.
01
Tek-Mount Receivers
The Receiver is the stationary side of the system. Add extra Receivers to create compatible mounting locations across belts, duty platforms, MOLLE equipment, vehicles, desks, safes, and other supported surfaces.
Shop Receivers
02
Tek-Mount Disks
The 360 Insert Disk attaches to the holster, pouch, sheath, or accessory being moved. Add additional Disks so more compatible gear can connect to the same group of Tek-Mount Receivers.
Shop Disks
03
Adapter Kits & Mounting Accessories
Expand a full-size Tek-Mount setup with Safariland® and Alien Gear® holster adapter kits, Direct to MOLLE hardware, multi-surface mounting screws, duty mounts, and other compatible accessories.
Shop Adapters